contact usabout usask an experthome
OUR PRODUCTS
 

Flowmatic Filtration Equipment

Residential Reverse Osmosis

Flowmatic® Fully Assembled Residential RO Systems

Fully assembled residential RO systems from your single source supplier. All systems come complete with top quality components, installation instructions and attractive packaging.

Features

  • Top quality pre-filters for superior performance. (Spun, solid block carbon & post carbon filter).
  • 50 GPD capacity.
  • NSF listed Flowmatic® ROPRO® storage tank, rated for pressures to 100 psi; non-corrosive construction.
  • Filmtec ® high rejection membranes from Dow® Corporation. Up to 98% rejection.
  • Fully assembled with complete installation instructions included.
  • Flowmatic® filter housings, NSF standard 42 certified. Rated for pressures to 125 psi.
  • Chrome, long-reach, lead-free faucet. (Meets State of California's requirements).
  • Wrench for convenient sump removal.


FMRO4J
(4 stage with Jaco® compression fittings)
FMRO4G
(4 stage with John Guest® quick connect fittings and 3/8" tubing post tank)

FMRO5G
(5 stage with John Guest® quick connect fittings and 3/8" tubing post tank) FORO5J with Jaco compression fittings also available
FMRO5GP
(5 stage with John Guest® quick connect fittings and 3/8" tubing post tank with booster pump installed)

Membrane Housings

As the #1 RO component supplier in the water quality improvement industry, we offer more options than anyone in the business. In this section you will find membrane housings, mounting clips, replacement membranes, RO components, fully assembled RO systems, standard kits and custom kits.

Flowmatic's membrane housings are manufactured from the highest quality NSF listed, FDA grade polpropylene,WQA validated.

Features

  • Standard 1/8" NPT molded thread
  • Models with John Guest fittings
  • High quality finish
  • Burst Pressure exceeds 500 psi
  • Cycle test 150 psi, 150,000 cycles
  • Choice of five housing styles to meet every requirement

Replacement RO Membranes

High quality membranes for top performance and long services life. Pacakged dry for extended shelf life.

As the #1 RO component supplier in the water quality improvement industry, we offer more options than anyone in the business. In this section you will find membrane housings, mounting clips, replacement membranes, RO components, fully assembled RO systems, standard kits and custom kits.



Flowmatic® ROPRO® Storage Tanks For Residential RO Systems

Flowmatic's new ROPRO storage tanks are made of the highest quality, NSF listed, FDA approved polypropylene, so they will never dent, chip or rust. Available in a number of colors, all with 1/4" MNPT pipe threads. Shipping weight is 10 lbs. Carton dimensions are 9-1/2" x 9-1/2" x 20".

ROPRO tanks (W&B) are NSF certified for pressures to 100psi. PRO-4000W tanks are NSF certified for pressures to 50 psi.

Features

  • Molded-in air valve to prevent air loss
  • Rated for pressures to 100 psi
  • Diaphragm design pre-charged to 7 psi
  • Will not dent, chip or rust
  • 100% polypropylene
  • 90º ball valve included (BV9014W)
  • Five year limited warranty
  • White, blue and black colors available
  • NSF Standard 58 certified


Amtrol® RO Storage Tanks

Metal, diaphram design storage tanks rated for pressures to 100 psi, powder coated in blue & white.


Flowmatic® Waterminder™ Meters

For Automatic Shut Off Based On Gallons Filtered

These unique, patented meter valves provide automatic shut-off of a potable water system for filter replace-ment after a pre-determined quantity of water has been filtered.

Features

  • Choice of 1800 or 3800 gal. capacity
  • Settings of 100 gallon increments
  • Accuracy within 10% of setting
  • Operating pressure from 15 to 125 psi
  • Burst tested to 500 psi
  • Assortment of pipe fittings
  • Manufactured using NSF listed materials
  • Settings in US gallons and liters
  • Lifetime limited warranty

Flowpro® Digital Meter...It's Totally Awesome!

Finally, a line of digital flow meters with the functions and price you've been looking for! These unique digital meters are available with two AAA batteries or with 24V DC power.

Applications
* Multiple stage filtration systems
* Lab testing whee low flow rates need to be viewed
* Water coolers
* Rental units where users are billed on a per gallon basis

Model FPDM-100
Capacity setting from 100 to 9900 gallons, with flow registered in gallons per minute. Highly accurate to within 7% of setting. Flow rate indicated from 0.33 to 2.00 GPM. Calendar time settings from 30 to 720 days. Pre-sets for gallons and / or days. Audible alarm sounds to indicate when cartridge replacement is necessary. Standard threads are 3/8" FNPT. Two AAA batteries are included. Low battery alarm, with batteries used only when water is flowing. Rated to 120 psi and temperatures to 100°F.

Model FPDM-200
Up to five independent capacity settings.
Digital meter with ability to reset totalizing so users may track total flow in gallons (or liters for model FPDM-200LD). Offers ability to monitor five independent functions, with capacity settings m 100 to 19,900 gallons. (Stages that are not used can be disabled.) Audible alarm indicates cartridge replacement.

Model FPDM-210
Five function capacity with solenoid valve.
Meter comes complete with all features and specifications, and includes a solenoid valve, which triggers when one or more of the capacity settings reach zero gallons remaining, to shut off the water system. Audible alarm sounds to indicate when car-tridge replacement is necessary, with 1-5 functions independent of one another. Five capacity settings from 100-19,900 gallons.

Specifications
Capacity settings depend on each model, with flow registered in gallons per minute. (Liters for model FPDM-200LD). Highly accurate, to 7% of setting. Flow rate indicated from 0.33 to 2.0 GPM. Calendar time settings from 30 to 720 days. Pre-sets for gallons and / or days. Audible alarm sounds to indicate when cartridge replacement is necessary. Standard threads are 3/8" FNPT. Two AAA batteries are included. Low battery alarm, with batteries used only when water is flowing. Rated for pressures to 120 psi and temperatures to 100°F.


Flowmatic has been an industry leader or high quality, state-of-the-art R/O components and filtration equipment for over twenty years. Their reputation has been established by providing high quality products, personal service, competitive pricing and on-going research and development.

 

quantrol
Email: info@quantrol.net
543 So. Washington St.
Naperville, IL 60540
Toll Free Phone: 1.866.782.6876
Phone: 630.355.3330
Fax: 630.355.3568
©2005 Quantrol