|
|
 |
Pulsatrol Controllers
Boiler Controllers
Pulsatrol MB9200 Series Controller
The MB9200 Series Controller is a microprocessor based controller for boiler systems. The controller provides the ability to accurately control the level of dissolved solids based on µS/cm on a timed or continuous sample basis.
Control Functions
All continuously monitored sensor input functions (conductivity) will provide user definable set points for maintaining a specific value within the system for up to two boilers at the same time. Each set point will have a user definable differential as the control band, programmable high and low alarm points.
Chemical Feed Timer
The chemical feed timer shall be user selectable as any one of the following:
- Percent - User will be able to select a percent "ON" time of a user defined "cycle" time.
- Limit - Timer will run as controller bleeds until a user programmed "limit" time is met or the bleed is satisfied.
- Percent of Post-Bleed - Timer will run for a user defined percentage of the bleed time after bleed is satisfied.
- Pulse Timer - Timer initiated from dry contacting head water meter. User can define timer run time, water meter input and contact accumulation before timer initiation.
Remote Communications
The controller shall have the optional capability of serial communications using PULSAworks software. The serial communications can occur either by direct RS232 port, or remotely via an optional internal modem. PULSAworks allows the user to access real-time system values and download data history files and save files to disk. History files may be viewed and printed in table or graph form, the graph form can be user customized. The optional internal modem allows the controller to perform alarm call back for alarm condition notification to a pager or computer running PULSAworks software.
Features
- Lockable Window
- One Point Calibration
- 2 Chemical Feed Timers
- Full 24 Month Warranty
Downloadable Files
Pulsatrol MB9300-9600 Series Controllers
The MB9200 Series Controller is a microprocessor based controller for boiler systems. The controller provides the ability to accurately control the level of dissolved solids based on µS/cm on a timed, held or continuous sample basis. Select models provide the ability to control the alkalinity of system water in units of pH.
Control Functions
All continuously monitored sensor input functions (conductivity) will provide user definable set points for maintaining a specific value within the system for up to two boilers at the same time. Each set point will have a user definable differential as the control band, programmable high and low alarm points.
Chemical Feed Timer
The chemical feed timer shall be user selectable as any one of the following:
- Percent - User will be able to select a percent "ON" time of a user defined "cycle" time.
- Limit - Timer will run as controller bleeds until a user programmed "limit" time is met or the bleed is satisfied.
- Percent of Post-Bleed - Timer will run for a user defined percentage of the bleed time after bleed is satisfied with a fail-safe user set maximum run time.
- Pulse Timer - Timer initiated from dry contacting head water meter. User can define timer run time, water meter input and contact accumulation before timer initiation.
- Cycle Timer - User will be able to cycle chemical on and off a specified number of times during during a 28 day-per-month calendar basis.
- Slave Timer - Timer will turn on its output when one or more selected relays activate. The relays can be slaved in any combination.
- Disabled - Timer can be totally deactivated.
Remote Communications
The controller shall have the optional capability of serial communications using PULSAworks software. The serial communications can occur either by direct RS232 port, or remotely via an optional internal modem. PULSAworks allows the user to access real-time system values and download data history files and save files to disk. History files may be viewed and printed in table or graph form, the graph form can be user customized. The optional internal modem allows the controller to perform alarm call back for alarm condition notification to a pager or computer running PULSAworks software.
Features
- 4 Chemical Feed Timers
- One Point Calibration
- DIN connections for I/O
- Full 24 Month Warranty
Downloadable Files
Pulsafeeder ABC Series Controller
The ABC Boiler Controller Series consists of three distinct models featuring the latest analog technology and attractive styling. Additional features include selectable scale, temperature compensation and a rugged enclosure designed to NEMA 4x for reliable and accurate monitoring. This simplified design provides automated control at an economical cost. The ABC series provides electrical conduit connections as standard for blow down valve and accessory activation.
Key Features:
- Front Panel Calibration
- Front Panel Dial Set-Point
- Conductivity Range 0-20,000 µS
- Blow Down Indicator LED
- Alarm Indicator LED
- Relay Test Switch
- Power Indicator
- Weather-Tight Enclosure Designed to NEMA 4x
- Wall-Mountable
Features
- Weather-Tight
- Relay Test Switch
- Wall-Mountable
- Front Panel Calibration
Downloadable Files
Choose Pulsatrol For Affordable, High Performance Controllers And Monitors That Are Easy To Specify, Easy To Use.
Pulsatrol controllers and monitors offer versatile, accurate, easily specified solutions to your fluid control problems. A modular approach to hardware and software design has created a line of standard units which include the most needed features for optimum levels of performance.
Each of these units can be custom-tailored to meet your performance requirements, merely by adding what you need from a long list of available options.
Picking the right controller or monitor is easy, just select the model that's right for your applications:
* Cooling Towers
* Boiler Water Treatment
* Programmable Timers
Then choose the level of sophistication you need. Series 100, Series 200, and Series 300 units offer different sets of standard features that let you buy just the right amount of performance and capability.
Email:
info@quantrol.net
543 So. Washington St.
Naperville, IL 60540
Toll Free Phone: 1.866.782.6876
Phone: 630.355.3330
Fax: 630.355.3568
©2005 Quantrol
|
